sehlahisoa
Sistimi e phahameng ea tlhaloso ea laparoscope Sistimi e thata ea endoscope
Tlhaloso ea Sehlahisoa
1. Paramethara ea processor ea Video le mohloli o batang o bobebe oa 2 mochining o le mong - (Full HD 1080P)
 | Lebone : | Leseli la LED (100W tšoeu) |
| Matla: | 100-240V;50-60HZ | |
| Leseli : | ≥3,000,000 lux | |
| Mocheso oa 'mala : | ≥5700K | |
| Sephetho sa lets'oao la video: | CVBS, HD-SDI, VGA, DVI-D, HDMI | |
| Tokiso ea ho khanya : | 0-100 sehlopheng | |
| Ka ho leka-lekana : | Tlanya e le 'ngoe ho leka-lekana ho tšoeu | |
| Mosebetsi oa mantlha: | E ts'ehetsa setšoantšo se le seng sa ho tobetsa ha 'ngoe. E na le boto ea LCD ea 5-inch e nang le 'mala o phahameng oa touch screencontral board. |
2.Parament of Electrosurgical Unit
 | Phepelo ea motlakase: | 110/220V～ 50/60HZ |
| Matla a matla: | 1100VA | |
| Hlophisa | Sehlopha sa I Mofuta oa BF | |
| Mokhoa oa ho sebetsa: | Ho kenya ka nakoana, ho sebetsa ka ho tsoelang pele | |
| Fuse: | BGXP5×20 5A 3pcs | |
| Maqhubu a phahameng ka ho fetisisa: | 400W 500Ω | |
| Ho paka: | Tšoara ka tlhokomelo, holimo, boloka omile joalo-joalo | |
| Ho fokotsa matla a mochine: | ≤1000VA (CUT 400W, BIOPOLAR 70W tlhahiso) | |
| Khatello ea Barometric: | 500hPa～1060hPa | |
| Mocheso: | 5℃～40℃ | |
| Mongobo o amanang: | ≤80 | |
| Khatello ea Barometric: | 86.0–106.0kPa | |
| Nako ea ho sebetsa: | 360 ~ 512kHz |
3.Parament ea CO2 pneumoperitoneum insufflator mochine
 | Matla a phepelo ea motlakase: | AC220V; |
| Maqhubu a matla: | 50Hz | |
| Matla a kenyang: | 40VA; | |
| Fuse: | Flal250v 1A | |
| Taolo ea khatello ea ente ea khase: | 0.67kpa ~ 3.30kpa (1mmhg) | |
| Laola ho nepahala ha khatello ea ente ea khase: | ± 0.13kpa (1mmhg) | |
| Sekhahla sa phallo ea khase e kentsoeng: | 1L / min - 30L / min ka ho latellana | |
| Phapang e lumellehang ea sekhahla sa phallo ea khase e kentsoeng: | ± 20% |
4. Parament ea pompo ea Souice
 | Palo ea li-volts | AC220V 50HZ |
| E lekantsoe Pwr. | 50 VA | |
| Lekhalo la pos-pressure | 10 - 50 kPa | |
| Mokhahlelo oa neg-khatello | -50 ~ 10 kPa | |
| Sehlopha se bolokehileng | Mofuta oa I oa Mohlala B | |
| Mokhoa oa ho matha | Inter loading/Cot.Mosebetsi | |
| Lerata | ≤50dB |
5.Parament ea Nosetso Pump
 | Palo ea li-volts | 240v,50Hz/60Hz |
| E lekantsoe Pwr. | 100 VA | |
| Range of Press. | 15–400mmHg (2–53.3kPa) | |
| Mefuta e fapaneng ea ho fofa. | 0.1～1.0 L/min | |
| Sehlopha se bolokehileng | Mofuta oa I oa Mohlala B | |
| Mokhoa oa ho matha | Inter loading/Cot.Mosebetsi | |
| Lerata | ≤50dB | |
| Boholo ba moamoheli | 360*315*160mm/ 9KGS |
6.LCD Mohlokomeli
 | Boholo ba ponts'o | 21.5” |
| Phepelo ea motlakase | Phepelo ea Matla a Ntle 24V | |
| Qeto | 1920x1080 | |
| Karolelano ea Pontšo | 16:9 | |
| Mmala | 1.07B | |
| Khanya ea Camoration | 180±10 cd/㎡ | |
| Max.Khanya | 400 cd/㎡ | |
| Boholo ba sephutheloana | 65*36.5*60cm (GW:16.0kgs) |
7.Likoloi tsa thepa
 | Trolley | Boholo: 500 * 700 * 1350mm |
| Boholo ba sephutheloana | 127*63.5*22cm (GW:36kgs) |
8.Laparoscopy le lenane la likarolo tsa ho buoa
| Ntho | Lebitso la sehlahisoa | Boholo | Setšoantšo | Qty | Yuniti |
| 1 | Gripper (meno a se nang letho) | Φ5×330mm |
| 1 | pc |
| 2 | Ho koba pliers e hlobolang | Φ5×330mm |
| 1 | pc |
| 3 | Lithako tsa karohano (Lekhutlo le letona) | Φ5×330mm |
| 1 | pc |
| 4 | Lithako tsa karohano (bolelele bo mahareng) | Φ5×330mm |
| 1 | pc |
| 5 | Sekere (se kobehileng) | Φ5×330mm |
| 1 | pc |
| 6 | Letlapa la titanium | Φ5×330mm
|
| 1 | pc |
| 7 | Sekotwana sa titanium | S |
| 2 | lebokose |
| 8 | Bipolar electric forceps | Φ5×330m |
| 1 | pc |
| 9 | Mokotla o lahliloeng oa mohlala oa endoscope (o nang le molamu) | Φ5 limilimithara |
| 1 | pc |
| 10 | Hoko ea motlakase | 5mm, angle 3mm, angle |
| 2 | pc |
| 11 | The bucking | Φ5×330m |
| 1 | pc |
| 12 | Scalloped spreader | Φ5×380 |
| 1 | pc |
| 13 | Pneumoperitoneum nale | Φ2.5 * 100-120mm |
| 1 | pc |
| 14 | laparoscope | Φ5,30°/Φ10，0° |
| 1 | PC |
| 15 | Biopsy forceps | Φ5mm×330 |
| 1 | pc |
| 16 | Canine biopsy forceps | Φ5mm×330 |
| 1 | pc |
| 17 | Lisebelisoa tsa ho phunya | Φ5 limilimithara |
| 1 | pc |
| 18 | Lisebelisoa tsa ho phunya | Φ5mm, khoele ea sekoere |
| 2 | pc |
| 19 | Loma lithako tse sehang | Φ5mm×330 |
| 1 | Pc |
TEAM & Feme
Mohaho oa Ofisi
Ofisi ea Tšebeletso
Koetliso ea Sehlahisoa
Stock 1
Workshop
Kamore ea liteko
Pontšo
Pontšo
Sephutheloana
E Itokiselitse ho Romeloa
LBH
P: Ke bokae bonyane ba otara (MOQ)?
A: Bakeng sa boholo ba lihlahisoa tsa rona tsa bongaka, esita le odara ea yuniti e le 'ngoe e amoheloa ka mofuthu.
P: A na u ka etsa OEM / label poraefete?
A: Ehlile, re ka u etsetsa label ea OEM / poraefete ka tefiso ea mahala
P: Nako ea hau ea ho fana ke mang?
A: Ka kakaretso ke matsatsi a 7-10 a ho sebetsa bakeng sa sete e le 'ngoe, kapa ho latela bongata ba odara.
P: Joang ho romela odara?
A: Ka kopo, re tsebise taelo ea hau, ka leoatle, ka sefofane kapa ka Express, tsela efe kapa efe e lokile bakeng sa rona.Re na le morekisi ea hloahloa haholo ho fana ka litšenyehelo tse ntle ka ho fetisisa tsa ho romella, tšebeletso le tiisetso.
P: Lipehelo tsa hau tsa tefo ke life?
A: Re amohela T/T, LC, Western Union, Paypal le tse ling.Ka kopo sisinya mokhoa oa ho lefa oo u o ratang.